Creating Devices that use the Live API

Creating Devices that use the Live API

Max for Live provides two different ways to access the Live application directly through the Live API:

Regardless of which method you decide to use, online documentation for the Live Object Model describes the properties and functions of a Live session that can be queried and set and observed.

You can get or set values, call functions, and observe the status of properties using the Live API from any kind of Max for Live device on any channel.

The Live API is described in this overview .

The Live Object Model divides the Live application into several basic functional units (properties) associated with aspects of the Live application - the application itself, Songs, Tracks, Clip slots, Clips, Devices, Device Parameters, the Mixer Device, Scenes, Cue Points, And Control Surfaces. The Live API provides ways to access some properties of the application to control how the Live application displays them to you (Application.View, Song.View, and Track.View).

Your use of the Live API involves one of four kinds of different operations:

  • You can query (get) the current state of a property of your current Live session.
  • You can set the state of some properties of your current Live session
  • Some properties can be controlled using functions that perform various actions (e.g. firing a clip).
  • Some properties can be observed (i.e. their current state is reported and updated automatically).

The Live Object Model provides a complete reference to which objects can be queried, set, and observed, as well as a listing of the functions associated with them.

Resources - Live API examples

Max for Live includes a set of helpful abstractions that demonstrate how to interact with the Live API in a Max for Live device. The Live API Snippets provide programming examples and starting points for constructing your own patches that interact directly with the Live application. They are grouped by the part of a Live Session they can access and control.

Querying the Live API (getting data) using Max for Live objects

You can use the Max for Live live.path and live.object objects to find out the current state of any property defined in the Live Object Model reference.

The live.path object is used to navigate to the Live object properties you wish to query. Each property of the Live object model in a session is associated with an id specific to that particular Song, Track, Clip, Clip Slot, Device, etc. Sending a message to a live.path object results in an object id being sent out the left outout (where the id follows the object) or middle outlet (where the id follows the path).

In turn, the live.object object takes the id message from the live.path object and lets you use get messages to get information about the properties of the object. The result of the query is sent out the outlet of the live.object object, preceded by the name of the query.


Querying the Live API

  • Using the Live Object Model, find the canonical path listing for the property (in this case, the Track properties). This part of the Live Object Model listing displays its canonical path - the syntax for queries about the Track in a Live session.

  • Find the listing in the Live Object Model page for the query you want to make (in this example, we want to to see whether or not Track 3 is muted).

The listing from the Live Object Model listing for the mute property of a Live Track lists its Type as bool (boolean, 0 = off, 1 = on), and its Access as get, set, observe, which means that this property can be queried or set or observed (there's also an indication that Live Master Tracks cannot be queried or set).

  • Use a message box to construct a message to be sent to the live.path object telling it the name of the property we want to query - Track 3 (by convention, track numbering in the Live API starts from 0). In this case, the message is path live_set tracks 2 .

The live.path object responds with the message id N, where N is the id number associated with Track 3.

  • use a Max trigger object to set up a sequence of operations. When the trigger object receives the list output, it sends the id message to the live.object object's right inlet, and then sends a bang message to the message box containing the symbol get, followed by the name of the property being queried. In response, the live.object object sends the message mute 0 out the left outlet of the live.object object


Setting a property in the Live API using Max for Live objects

You can also use the Max for Live live.path and live.object objects to set the current state of many properties defined in the Live Object Model reference.

The live.path object is used to navigate to the Live objects you wish to query. Each property of the Live object model in a session is associated with an id specific to that particular Song, Track, Clip, Clip Slot, Device, etc. Sending a message to a live.path object results in an object id being sent out the left outout (where the id follows the object) or middle outlet (where the id follows the path).

In turn, the live.object object takes the id message from the live.path object and lets you use set messages, followed by arguments that specify the new setting to set the state of a property. In this example, we'll use a set message to mute Track 3 of a Live session.


Setting a Live API property

  • Using the Live Object Model, find the canonical path listing for the property (in this case, the Track properties). This part of the Live Object Model listing displays its canonical path - the syntax for queries about the Track in a Live session.

  • Find the listing in the Live Object Model page for the query you want to make (in this example, we want to to see whether or not Track 3 is muted).

The listing from the Live Object Model listing for the mute property of a Live Track lists its Type as bool (boolean, 0 = off, 1 = on), and its Access as get, set, observe, which means that this property can be set as well as queried and observed (there's also an indication that Live Master Tracks cannot be queried or set).

  • Use a message box to construct a message to be sent to the live.path object telling it the name of the property we want to query - Track 3 (by convention, track numbering in the Live API starts from 0). In this case, the message is path live_set tracks 3 .

The live.path object responds with the message id N, where N is the id number associated with Track 3.

  • Use a Max trigger object to set up a sequence of operations. When the trigger object receives the list output, it sends the id message to the live.object object's right inlet, and then sends a bang message to the message box containing the message set, followed by the name of the property we want to set and its new value - in this case, set mute 1 .

When you save and close the device and click on the upper message box, Track 3 will be muted.


Observing a property in the Live API using Max for Live objects

Some properties in the Live API can be observed. The Live API not only reports the current state of a property in response to a query when it is observed, but also subsequently updates the state of that property if it changes. Observing a property using the Live API uses the live.path object also used for getting and setting properties, but also uses thelive.observer objects to perform the task.

The live.path object is used to navigate to the Live objects whose functions you want to call. Each property of the Live object model in a session is associated with an id specific to that particular Song, Track, Clip, Clip Slot, Device, etc. Sending a message to a live.path object results in an object id being sent out the left outout (where the id follows the object) or middle outlet (where the id follows the path).

In turn, the live.observer object takes the id message from the live.path object and lets you use property messages to define what property of the object you want to observe. In this example, we'll observe whether or not Track 3 of our session is muted or not.


Observing a Live API property

  • Using the Live Object Model, find the canonical path listing for the property (in this case, the Track properties). This part of the Live Object Model listing displays its canonical path - the syntax for queries about the Track in a Live session.

  • Find the listing in the Live Object Model page for the property you wish to observe. Not all properties may be observed via the Live API (in this example, we want to to observe the behavior of muting on Track 3.

The listing from the Live Object Model listing for the mute property of a Live Track lists its Type as bool (boolean, 0 = off, 1 = on), and its Access as get, set, observe, which means that this property can be observed (there's also an indication that Live Master Tracks cannot be observed).

  • Use a message box to construct a message to be sent to the live.path object telling it the name of the property we want to query - Track 3 (by convention, track numbering in the Live API starts from 0). In this case, the message is path live_set tracks 3 .

The live.path object responds with the message id N, where N is the id number associated with Track 3.

  • Use a Max trigger object to set up a sequence of operations. When the trigger object receives the list output, it sends the id message to the live.observer object's right inlet, and then sends a bang message to the message box containing the message property, followed by the name of the property we want to observe - in this case, property mute .

When you save and close the device and click on the upper message box while Track 3 is playing, you'll notice that the patch displays a 0 (unmuted). If you mute the track by clicking on the Track Activator button, you'll see the output of the live.observer object change to a 1 (muted). As you unmute and mute the track, the value will change.


Calling a function in the Live API using Max for Live objects

The Live API also includes various kinds of functions that are used to perform activities such as changing various aspects of the Live application's interface display (View) or controlling the playing of clips or scenes. You can also use the Max for Live live.path and live.object objects to call (perform) these functions.

The live.path object is used to navigate to the Live objects whose functions you want to call. Each property of the Live object model in a session is associated with an id specific to that particular Song, Track, Clip, Clip Slot, Device, etc. Sending a message to a live.path object results in an object id being sent out the left outout (where the id follows the object) or middle outlet (where the id follows the path).

In turn, the live.object object takes the id message from the live.path object and lets you use call messages, followed by arguments that specify the name of the function you're calling and any data for the function in the form of arguments to execute the function. In this example, we'll use a fire function to play the clip in slot 2 or Track 2 of a Live session.


Calling a function of a Live API property

  • Using the Live Object Model, find the canonical path listing for the property (in this case, the ClipSlot properties). This part of the Live Object Model listing displays its canonical path - the syntax for queries about the ClipSlot in a Live session.

  • Find the listing in the Live Object Model page for the property's functions (in this example, we want to fire (launch) the clip in clip slot 2 on Track 2.

The listing from the Live Object Model listing for the fire function of the ClipSlot property indicates that it needs no other data arguments.

  • Use a message box to construct a message to be sent to the live.path object telling it the name of the property we want to query - Clip Slot 2 or Track 2 (by convention, all numbering in the Live API starts from 0). In this case, the message is path live_set tracks 1 clip_slots 1 .

The live.path object responds with the message id N, where N is the id number associated with Clip Slot 2 of Track 2.

  • Use a Max trigger object to set up a sequence of operations. When the trigger object receives the list output, it sends the id message to the live.observer object's right inlet, and then sends a bang message to the message box containing the message call, followed by the name of the function - in this case, call fire .

When you save and close the device and click on the upper message box while Track any other clip in any other clip slot in Track 2 is playing, you'll notice that the clip in Clip Slot 2 is launched.


Automating device parameters at signal rate

The live.object is designed to mimic user interactions with the Live Session (and adds to undo history), so there are some situations that involve rapid modulation of device parameters where the object may not be appropriate. The live.remote~ object allows you to directly modulate the parameters of any "remotely mappable" control in Live at signal rate.

As with setting values and calling functions, the live.path object is used to navigate to the Live objects whose functions you want to control. Each property of the Live object model in a session is associated with an id specific to that particular Song, Track, Clip, Clip Slot, Device, etc. Sending a message to a live.path object results in an object id being sent out the left outout (where the id follows the object) or middle outlet (where the id follows the path).

In turn, the live.remote~ object takes the id message from the live.path object and accepts signal data in its left inlet which is used to modulate or control the Live API property. In the following example, we'll use the output of a cycle~ object to control the sends on an audio track.


Controlling a property using the live.remote~ object

  • Using the Live Object Model, find the canonical path listing for the property (in this case, the MixerDevice properties). This part of the Live Object Model listing displays its canonical path - the syntax for queries about the Track in a Live session.

  • Find the listing in the Live Object Model page for the property you wish to control (in this example, we want to to control the first send on Track 1. Remember that numbering in the Live API starts from zero by convention.
  • Use a message box to construct a message to be sent to the live.path object telling it the name of the property we want to control. In this case, the message is path live_set tracks 0 mixer_device sends 0 .

The live.path object responds with the message id N, where N is the id number associated with the first send on Track 1.

  • Add some logic to produce signal-rate data to control the property. In this case, we're using a cycle~ device to use a sinusoidal waveform and then using the abs~ (absolute value) object to keep the output in the positive signal range.

When you save and close the device and click on the upper message box while Track 1 is playing, you'll notice that the dial for Send A on Track one moves at the rate you specify for the cycle~ object.


See Also

Name Description
Technical Notes Technical Notes
Max For Live Max For Live