snowfall~
Description
The snowfall~ object controls a multi-dimensional particle as one or more audio ramps whose lifetime is triggered and controlled by an input phasor ramp from 0 to 1. The object will typically be used within a larger system of quasi-independent particles using the MC Wrapper as mc.snowfall~.
Arguments
dimenions [int]
Sets the number of dimensions (1 - 4) which determines the number of signal outputs. The default value is 1.
Attributes
boundarymode [int]
The boundarymode attribute controls what happens when the particle output value reaches the current minimum or maximum. It is global for all dimensions.
Possible values:
0 = 'bounce'
(
Bounce Mode
)
Causes the particle to reverse its current direction.
1 = 'end'
(
End Mode
)
Causes the particle to cease outputting; the signal output will become zero.
2 = 'wrap'
(
Wrap Mode
)
Causes the particle to move to the opposite boundary. If the particle reaches the current maximum value, its value jumps to the minimum. If the particle reaches the current minimum value, its value jumps to the maximum.
3 = 'clip'
(
Clip Mode
)
The particle's value remains at the value of the boundary (maximum or minimum).
dimensions [int]
Sets the number of dimensions (1 - 4) which determines the number of signal outputs. The default value is 1. The dimensions attribute cannot be changed after the object is created. It can be set via an argument or typed-in attribute.
direction [4 floats]
direction contains up to four values, one for each dimension.
When a particle starts, the direction attribute determines the velocity of movement. The value is expressed in units per second. For example, when direction is set to 5 means, the output value will increase by 5 over one second. If the direction attribute is negative, the output value is likely to decrease over time. If the direction attribute is positive, the output value is likely to increase over time.
directiondev [4 floats]
directiondev contains up to four values, one for each dimension.
Sets a random deviation around the value of direction used in setting the particle velocity and direction.
endmode [int]
Sets the behavior when the particle ends, either as a result of hitting a max or min boundary or when the input signal resets or goes to zero.
Possible values:
0 = 'End Value'
(
Set to end value
)
When endmode is set to End Value, the output is set to the current value of the endvalue attribute when the particle ends.
1 = 'Current Value'
(
Remain at current value
)
When endmode is set to Current Value, the output remains at its current value when the particle ends.
endvalue [4 floats]
endvalue contains up to four values, one for each dimension.
Sets the value to output when a particle's life ends.
energyramp [4 floats]
energyramp contains up to four values, one for each dimension.
The energyramp multiplies the incoming 0 - 1 ramp signal value as part of the particle calculation. If you do not want the particle to move faster as the input ramp value increases, set the energyramp to zero.
initial [4 floats]
initial contains up to four values, one for each dimension.
Sets a starting output value for the particle.
initialdev [4 floats]
initialdev contains up to four values, one for each dimension.
Sets a random deviation around the initial value used in choosing the starting output value.
interval [float]
Set the time interval (in milliseconds) between new particle trajectory calculations.
intervaldev [float]
Sets a random deviation around the value of interval used in choosing the update interval.
max [4 floats]
max contains up to four values, one for each dimension.
Set's the particle's maximum boundary value. Once the particle reaches this value, its behavior is determined by the current setting of the boundarymode attribute.
min [4 floats]
min contains up to four values, one for each dimension.
Set's the particle's minimum boundary value. Once the particle reaches this value, its behavior is determined by the current setting of the boundarymode attribute.
scalemax [4 floats]
scalemin contains up to four values, one for each dimension.
Sets a scale factor for the particle's output value. The particle's value will always range between the scaling minimum and the scaling maximum.
scalemin [4 floats]
scalemax contains up to four values, one for each dimension.
Sets a scale factor for the particle's output value. The particle's value will always be bettern the scaling minimum and the scaling maximum.
squish [4 floats]
squish contains up to four values, one for each dimension.
When the boundarymode attribute is set to Bounce, the squish attribute multiplies the force of the particle's direction reversal.
wanderprob [4 floats]
wanderprob contains up to four values, one for each dimension.
Sets the probability that at any particular update, the direction will reverse. Note that as the interval becomes smaller, the effect of the wanderprob increases.
Common Box Attributes
annotation [symbol]
Sets the text that will be displayed in the Clue window when the user moves the mouse over the object.
background [int] (default: 0)
Adds or removes the object from the patcher's background layer. background 1 adds the object to the background layer, background 0 removes it. Objects in the background layer are shown behind all objects in the default foreground layer.
color [4 floats]
Sets the color for the object box outline.
fontface [int]
Sets the type style used by the object. The options are:
plain
bold
italic
bold italic
Possible values:
0 = 'regular'
1 = 'bold'
2 = 'italic'
3 = 'bold italic'
fontname [symbol]
Sets the object's font.
fontsize [float]
Sets the object's font size (in points).
Possible values:
'8'
'9'
'10'
'11'
'12'
'13'
'14'
'16'
'18'
'20'
'24'
'30'
'36'
'48'
'64'
'72'
hidden [int] (default: 0)
Toggles whether an object is hidden when the patcher is locked.
hint [symbol]
Sets the text that will be displayed in as a pop-up hint when the user moves the mouse over the object in a locked patcher.
ignoreclick [int] (default: 0)
Toggles whether an object ignores mouse clicks in a locked patcher.
jspainterfile [symbol]
JS Painter File
patching_rect [4 floats] (default: 0. 0. 100. 0.)
Sets the position and size of the object in the patcher window.
position [2 floats]
Sets the object's x and y position in both patching and presentation modes (if the object belongs to its patcher's presentation), leaving its size unchanged.
presentation [int] (default: 0)
Sets whether an object belongs to the patcher's presentation.
presentation_rect [4 floats] (default: 0. 0. 0. 0.)
Sets the x and y position and width and height of the object in the patcher's presentation, leaving its patching position unchanged.
rect [4 floats]
Sets the x and y position and width and height of the object in both patching and presentation modes (if the object belongs to its patcher's presentation).
size [2 floats]
Sets the object's width and height in both patching and presentation modes (if the object belongs to its patcher's presentation), leaving its position unchanged.
textcolor [4 floats]
Sets the color for the object's text in RGBA format.
textjustification [int]
Sets the justification for the object's text.
Possible values:
0 = 'left'
1 = 'center'
2 = 'right'
varname [symbol]
Sets the patcher's scripting name, which can be used to address the object by name in pattr, scripting messages to thispatcher, and the js object.