Controlling Max with Messages

You can control Max, MSP, and Jitter using the message box object. Normally, the message box contains an object, and you click on it or replace a variable typed into the message box to send a message down a patch cord to another Max object. However, if the message in a message box begins with a semicolon (;) followed by the word max, any message which follows will be sent directly to the Max application itself, just as though there were a receive object named "max".

Here is listing of the messages you can send to the Max application using this technique:

buildcollective

The word buildcollective, followed by a reference name symbol and an output filename, builds a collective using the patcher associated with the symbol. The collective is named with the output filename.

checkpreempt

The word checkpreempt, followed by a symbol, sends the current Overdrive mode to the receive object named by the symbol.

clean

Causes Max not to show a Save Changes dialog when you close a window or quit, even if there are windows that have been modified. This is useful in conjunction with the quit message below.

clearmaxwindow

Clear the Max Console.

closefile

The word closefile, followed by a symbol, closes the patcher file previously opened with the openfile message to Max associated with the symbol.

crash

The word crash causes the Max application to terminate and generate a standard crashlog. When relaunched, The Max application will perform standard crash recovery (if crash recovery is enabled in the Max preferences).

db.exportmetadata

Causes Max to write the metadata information currently stored in the database to a file. An optional argument can be used to specify a filename. If no filename is specified, the metadata is backed up to a file in your preferences folder.

db.importmetadata

Causes Max to load metadata information from a previously stored file into the Max database. An optional argument can be used to specify a filename - when no argument is specified, Max will look for a backup file from a previous call to db.exportmeta in your preferences folder.

db.reset

Causes Max to recreate the database Max uses when operating (e.g. the File Browser).

debug

The word debug, followed by a zero or one, toggles the sending of Max's internal debugging output to the Max Console. Debug information may be of limited use for anyone who isn't debugging Max itself.

disablevirtualmididestinations

The word disablevirtualmididestinations, followed by a one, causes the Core MIDI driver to not create virtual destinations. If an argument of zero is given, the virtual destinations are created again.

disablevirtualmidisources

The word disablevirtualmidisources, followed by a one, causes the Core MIDI driver to not create virtual sources. If an argument of zero is given, the virtual sources are created again.

enablepathcache

The word enablepathcache, followed by a zero or one, turns on (or off) Max's search path cache. This should only be done if you noticed unusual behavior when opening files.

externaleditor

The word externaleditor followed by a symbol sets the text editor used for editing text file content - such as saved coll files, text files and Javascript code.

externs

List all of the external objects currently loaded in the Max Console.

fileformat

The word fileformat, followed by two symbols that specify a file extension and a four-character file type, tells Max to associate a filename extension with a particular filetype. The message max fileformat .tx TEXT associates the extension .tx with TEXT (text) files. This allows a user to send a message read george and locate a file with the name george.tx. It also ensures that files with the extension .tx will appear in a standard open file dialog where text files can be chosen.

fixwidthratio

The word fixwidthratio, followed by a floating-point number, sets the ratio of the box to the width of the text when the user chooses Fix Width from the Object menu. The default value is 1.0. A value of 1.1 would make boxes wider than they needed to be, and a value of 0.9 would make boxes narrower than they need to be.

getarch

The word getarch, followed by a symbol used as the name of a receive object, sends the currently running Max architecture (always 'x64') to the named receive object.

getdefaultpatcherheight

The word getdefaultpatcherheight followed by a symbol used as the name of a receive object, causes Max to report the current default patcher height in pixels to the named receive object (See also the setdefaultpatcherheight message to Max.)

getdefaultpatcherwidth

The word getdefaultpatcherwidth, followed by a symbol used as the name of a receive object, causes Max to report the current default patcher width in pixels to the named receive object (See also the setdefaultpatcherwidth message to Max.)

getenablepathcache

The word getenablepathcache, followed by a symbol used as the name of a receive object, will report whether the path cache is enabled to the named receive object. (See also the enablepathcache message to Max.)

geteventinterval

The word geteventinterval, followed by a symbol used as the name of a receive object, will report the event interval to the named receive object. (See also the seteventinterval message to Max.)

getfixwidthratio

The word getfixwidthratio, followed by a symbol used as the name of a receive object, reports the current fix with ratio value to the named receive object. (See also the fixwidthratio message to Max.)

getpollthrottle

The word getpollthrottle, followed by a symbol used as the name of a receive object, reports the current poll throttle value to the named receive object. (See also the setpollthrottle message to Max.)

getqueuethrottle

The word getqueuethrottle, followed by a symbol used as the name of a receive object, causes Max to report the current queue throttle value to the named receive object. (See also the setqueuethrottle message to Max.)

getrefreshrate

The word getrefreshrate, followed by a symbol used as the name of a receive object, causes Max to report the current refresh rate in frames per second (fps) to the named receive object. (See also the refreshrate message to Max.)

getruntime

The word getruntime, followed by a symbol used as the name of a receive object,sends a 1 to the named receive object if the current version of Max is a runtime version, and a 0 if not.

getslop

The word getslop, followed by a symbol used as the name of a receive object, reports the scheduler slop value to the named receive object. (See also the setslop message to Max.)

getsysqelemthrottle

The word getsysqelemthrottle, followed by a symbol used as the name of a receive object, reports the maximum number of patcher UI update events processed at a time to the named receive object. (See also the setsysqelemthrottle message to Max.)

getsystem

The word getsystem, followed by a symbol used as the name of a receive object, will report the name of the system (macintosh or windows) to the named receive object.

getversion

The word getversion, followed by a symbol used as the name of a receive object, will report the Max version number as a decimal value, which needs to be converted to a hexidecimal value (e.g. Max version 7.3.4 is reported as '1844'), and output from the named receive object.

hidecursor

Hides the cursor if it is visible.

hidemenubar

Hides the menu bar. Although the pull-down menus are not available when the menu bar is hidden, menu shortcut (accelerator) keys continue to work.

htmlref

The word htmlref, followed by an object name as a symbol, looks for a file called <object-name>.html in the search path. If found, a web browser is opened to view the page.

interval

The word interval, followed by a number from 1 to 20, sets the timing interval of Max's internal scheduler in milliseconds. The default value is 1. This message only affects the scheduler when Overdrive is on and scheduler in audio interrupt (available with MSP) is off. (When using scheduler in audio interrupt mode the signal vector size determines the scheduler interval.) Larger scheduler intervals can improve CPU efficiency on slower computer models at the expense of timing accuracy.

launchbrowser

The word launchbrowser, followed by a URL as a symbol, opens a web browser to view the URL. For example:

; max launchbrowser http://www.cycling74.com

maxcharheightforsubpixelantialiasing

The word maxcharheightforsubpixelantialiasing, followed by a number, sets a threshold font size (in points) for native subpixel aliasing. Since the look of subpixel antialiasing may be undesirable when working with large fonts as compared to regular antialiasing, this attribute lets you specify a threshold font size; if a font is larger than the specified size, it will be rendered using regular rather than subpixel antialiasing.
Note that Max honors your computer's system preferences - Max won't use subpixel aliasing if you've disabled it for your system. Setting this attribute value to zero value is 0 will always use regular antialiasing, and setting a very high value will always use subpixel antialiasing (unless it is disabled in system preferences).

maxinwmenu

When using the runtime version of Max *and* an active custom menubar object, maxinwmenu, followed by the number 1, will place an item called Status in the Windows menu, allowing users to see the Max Console (labeled Status in the runtime version). When maxinwmenu is followed by 0 the menu item is not present. The default is for the Status item to be present in the Windows menu.

maxwindow

Displays the Max Console. If the Max Console if not currently open, the window will be displayed. If the window is currently open, it will bring it to the front.

midilist

Prints the names of all current MIDI devices in the Max Console. (See also MIDI Messages to Max, below.)

nativetextrendering

The word nativetextrendering, followed by a zero or one, toggles between using JUCE font rendering (0) and the platform-native font rendering for your computer (1) when displaying text in Max.

notypeinfo

(Macintosh) The word notypeinfo, followed by zero or one, sets whether Max saves files with traditional Mac OS four-character type information. By default, Max does save this information in files.

objectfile

The word objectfile, followed by two symbols that specify an object name and a file name, creates a mapping between the external object and its filename. For example, the *~ object is in a file called times~ so at startup Max executes the command max objectfile *~ times~.

openfile

The word openfile, followed by two symbols that specify an reference name and a file name or path name, attempts to open the patcher with the specified name. If successful, the patcher is associated with the reference symbol, which can be passed as argument to the buildcollective, buildplugin, and closefile messages to Max. The openfile message is intended for batch collective building.

paths

List the current search paths in the Max Console. There is a button in the File Preferences window that does this.

preempt

The word preempt, followed by a one (on) or zero (off), toggles Overdrive mode.

pupdate

The word pupdate, followed by two integer values that specify horizontal and vertical position, moves the mouse cursor to that global location.

purgemididevices

Purge the missing MIDI device cache; Max maintains a cache of the MIDI Setup settings for known, but detached MIDI devices. Sending the message purgemididevices to Max will 'forget' any missing devices.

quit

Quits the Max application; equivalent to choosing Quit from the File menu. If there are unsaved changes to open files, and you haven't sent Max the clean message, Max will ask whether to save changes.

refresh

Causes all Max Consoles to be updated.

refreshrate

The word refreshrate, followed by a number, sets the rate limit, in frames per second, at which the UI for user interface objects is updated. Better visual performance can be achieved - at the cost of a slight performance decrease in Jitter, and little or no performance decrease for audio processing - by specifying a higher frame rate.

relaunchmax

The word relaunchmax causes the Max application to close and relaunch.

runtime

The word runtime, followed by a zero or one and a message, executes the message if the current version of Max is a runtime version (1) or non-runtime (0).

sendinterval

The word sendinterval, followed by a symbol, sends the current scheduler interval to the receive object named by the symbol.

sendapppath

The word sendapppath, followed by a symbol, sends a symbol with the path of the Max application to the receive object named by the symbol.

setdefaultpatcherheight

The word setdefaultpatcherheight, followed by an integer value greater than 100, sets the default patcher height in pixels.

setdefaultpatcherwidth

The word setdefaultpatcherwidth, followed by an integer value greater than 100, sets the default patcher width in pixels.

seteventinterval

The word seteventinterval, followed by an integer value, sets the time between invocations of the event-level timer (The default value is 2 milliseconds). The event-level timer handles low priority tasks like drawing user interface updates and playing movies.

setmixergbitmode

The word setmixergbitmode, followed by a 0, 1 or 2, sets the state of the Enable Mixer Crossfade preference for top-level patcher mixers. A value of 0 sets the preference to `Off`, 1 to `On`, and 2 to `Auto`.

setmixerlatency

The word setmixerlatency, followed by a number, sets the Mixer Crossfade Latency preference for top-level patcher mixers to the specified number of milliseconds.

setmixerparallel

The word setmixerparallel, followed by a 0 or 1, disables or enables the Enable Mixer Parallel Processing preference for top-level patcher mixers.

setmixerramptime

The word setmixerramptime, followed by a number, sets the Mixer Crossfade Ramp Time preference for top-level patcher mixers to the specified number of milliseconds.

setmirrortoconsole

The word setmirrortoconsole, followed by a 1 or 0, turns on or off (default is 0, off) mirroring of Max Console posts to the system console. The system console is available on the Mac using Console.app, or on Windows using the DbgView program (free download from Microsoft).

setsleep

The word setsleep, followed by a number, sets the time between calls to get the next system event, in 60ths of a second. The default value is 2.

setpollthrottle

The word setpollthrottle, followed by an integer, sets the maximum number of events the scheduler executes each time it is called (The default value is 20). Setting this value lower may decrease accuracy of timing at the expense of efficiency.

setqueuethrottle

The word setqueuethrottle, followed by an integer value, sets the maximum number of events handled at low-priority each time the low-priority queue handler is called (The default value is 2). Changing this value may affect the responsiveness of the user interface.

setslop

The word setslop, followed by a floating-point value, sets the scheduler slop value - the amount of time a scheduled event can be earlier than the current time before the time of the event is adjusted to match the current time. The default value is 25 milliseconds.

setsysqelemthrottle

The word setsysqelemthrottle, followed by a number, sets the maximum number of patcher UI update events to process at a time. Lower values can lead to more processing power available to other low-priority Max processes, and higher values make the user interface more responsive (especially when using many bpatchers).

showcursor

Shows the cursor if it is hidden.

showmenubar

Shows the menu bar after it has been hidden with hidemenubar.

size

Prints the number of symbols in the symbol table in the Max Console.

system

The word system, followed by the name of an Operating System (windows or macintosh) and a message, will execute the message if Max is running on the named OS.

useexternaleditor

The word useexternaleditor followed by a one (on) or zero (off) toggles using an external editor for text. If enabled, any situation where an external editor can be used will launch the editor. If disabled, an external editor will only be used when selected from the menu.

useslowbutcompletesearching

The word useslowbutcompletesearching, followed by a one (on) or zero (off), toggles complete file searching. When enabled, it causes files not found in Max's cache of the search path to be searched in the file system. This is necessary only in extremely rare cases where the file cache does not update properly. One such case is copying a file into the search path using a version of the Mac OS prior to 10.5.5 over a network. This option may cause patcher files to be loaded more slowly. The setting defaults to off with each launch of the application, and is not stored in the user's preferences. useslowbutcompletesearching 0 turns the setting off.