svf~ Reference

State-variable filter with simultaneous outputs

svf~

Examples

Arguments

freq [auto]

Optional

Sets the center frequency for the filter.

q [auto]

Optional

Sets the Q value for the filter. The svf~ filter takes Q values in the range of 0. through 1.

Inlets

x [auto]

The signal to be filtered.

freq [auto]

Sets the center frequency for the filter.

q [auto]

Sets the Q value for the filter. The svf~ filter takes Q values in the range of 0. through 1.

Outlets

out1 [signal]

The low-pass filtered signal.

out2 [signal]

The high-pass filtered signal.

out3 [signal]

The band-pass filtered signal.

out4 [signal]

The notch filtered signal.

Dynamic Attributes

These attributes can be modified in the code during execution using the set object

freq [auto]

Sets the center frequency for the filter.

q [auto]

Sets the Q value for the filter. The svf~ filter takes Q values in the range of 0. through 1.

reset [bang] (default: 0)

Banging this attribute will reset the object to its default state.

x [auto]

The signal to be filtered.

See Also

Name Description
phaseshift~ Distort the phase of a signal
filtercoeff~ Signal-rate filter coefficient generator
allpass~ Apply an allpass filter effect
comb~ Apply an comb filter effect
cross~ Third-order crossover filter
lores~ Resonant lowpass filter
reson~ Resonant bandpass filter
svf~ State-variable filter with simultaneous outputs
onepole~ Single-pole lowpass filter