jit.cellblock
Edit rows and columns of data
Description
Provides storage, viewing and editing of two-dimensional data. The format is similar to the "grid" display tools found in many other development environments. The current cell location, format, display and contents within jit.cellblock can be set with the mouse or by using Max messages.
Arguments
None.
Attributes
automouse[int]: 1
Enables/disables scrolling or selecting cells by clicking and dragging with the mouse. The default is 1 (enabled).
bblend[int]: 0
Specifies the percentage of background blending for the jit.cellblock object's display.In cases where there are both column and row background color overrides, this message will allow you to "blend" the colors. Column colors have a higher priority than row colors; if you have a row and column color that affect a cell, only the column color will normally be displayed. The message allows you to make the column color transparant using a percentage value, thereby allowing the row color to be displayed. This message applies the color transparency to all column colors without discrimination.
bgcolor[4 floats]
Sets the default background color of the jit.cellblock object in RGBA format.
border[int]: 1
Toggles drawing a border edge around the jit.cellblock.
bordercolor[4 floats]
Sets the default border color of the jit.cellblock object in RGBA format.
colhead[int]: 0
Toggles the behavior of the first column. If the header option is selected, the first column will change color to the rgba setting, and will not be directly editable in selmode 5.
cols[int]: 10
Sets the number of columns that are visible within the jit.cellblock. If the number of columns is greater than can be displayed, scrollbars will be shown.
colwidth[int]: 66
Sets the default column width of the individual cells. Changing these settings may change whether the scrollbars are displayed.
datadirty[int]: 0
Enables or disables the patcher-dirty flag. The default is 0 (disabled). When enabled, the jit.cellblock object will dirty the patch whenever its cell data changes.
fblend[int]: 0
Specifies the percentage of foreground blending for the jit.cellblock object's display.In cases where there are both column and row foreground color overrides, this message will allow you to "blend" the colors. Column colors have a higher priority than row colors; if you have a row and column color that affect a cell, only the column color will normally be displayed. The message allows you to make the column color transparent using a percentage value, thereby allowing the row color to be displayed. This message applies the color transparency to all column colors without discrimination.
fgcolor[4 floats]
Sets the default foreground color of the jit.cellblock object in RGBA format.
grid[int]: 1
Toggles drawing a border edge around each individual cell.
gridlinecolor[4 floats]
Sets the default grid line color of the jit.cellblock object in RGBA format.
hcellcolor[4 floats]
Sets the default selected cell color of the jit.cellblock object in RGBA format.
headercolor[4 floats]
Sets the default header color of the jit.cellblock object in RGBA format.
hscroll[int]: 1
Toggles horizontal scroll bar behavior. When set to 0, this attribute will override the jit.cellblock object’s automatic handling of scrollbar display when there is more information to show than the current settings can manage.
hsync[int]: 1
Toggles synchronizing horizontal movement with another jit.cellblock object whose third outlet is connected to the right-most inlet of the jit.cellblock object.
interval[int]: 250
Sets the interval, in milliseconds, at which the display of the contents of a coll or jit.matrix object is updated.
just[int]: 0
Sets the default text justification of all cells - left (0), center (1) or right (2).
Possible values:
0 = 'Left'
1 = 'Center'
2 = 'Right'
neverdirty[int]: 0
When neverdirty is enabled, changes to column, row, or cell properties do not dirty the patcher.
outmode[int]: 0
Sets the output mode of the cellblock. The output mode settings are:
0. separate values: Each cell is sent separately, and each data item within the cell is sent as a separate value.
1. as one list: If more than one cell is selected, all cell contents are formatted into a single list and output as a single cell output.
2. as one symbol: If more than one cell is selected, or if a cell has more than one value (e.g. a list), all values are combined into a single, space-separated symbol for output.
Possible values:
0 = 'Individual cells'
1 = 'As one list'
2 = 'As one symbol'
precision[int]: 2
Sets the default floating point precision for all cells. This does not alter the actual contents of the cell - it only changes the displayed precision of those contents.
readonly[int]: 0
Sets the read-only mode of the jit.cellblock object. The mode settings are:
-1: Eliminate any readonly setting. This option removes the cell/col/row from the structure, preventing any intrusion of the cell/col/row setting on the overall cellblock setting.
0: readonly off
1: readonly on
rowhead[int]: 0
Toggles the behavior of the first row. If the header option is selected, the first row will change color to the rgba setting, and will not be directly editable in selmode 5.
rowheight[int]: 18
The word
, followed by a number, sets the default row height of the individual cells. Changing these settings may change whether the scrollbars are displayed.
rows[int]: 10
Sets the number of columns and rows that are visible within the jit.cellblock. If the number of rows is greater than can be displayed, scrollbars will be shown.
savemode[int]: 0
Toggles the ability save the jit.cellblock object's cell contents as part of the main patcher. The default behavior is 0 (save the data as a separate file).
sccolor[4 floats]
Sets the default text background color of the scroller in RGBA format.
selmode[int]: 1
Sets the selection mode of the cellblock. The selection mode settings are:
0. no selection
1. select a single cell
2. select an entire column
3. select an entire row
4. select a single cell unless a column or row header is selected, in which case the entire column or row is selected.
5. in-place editing. A single cell is selected and values can be typed directly into the cell.
Possible values:
0 = 'No Selection'
1 = 'One Cell'
2 = 'Column'
3 = 'Row'
4 = 'Header Select'
5 = 'Inline Edit'
selsync[int]: 1
Toggles synchronizing selection with another jit.cellblock object whose third outlet is connected to the right-most inlet of the jit.cellblock object.
sgcolor[4 floats]
Sets the default text color of the scroller gutter in RGBA format.
signalmode[symbol]: monitor
Signal Analysis Mode
Possible values:
'monitor'
(
Current values
)
Displays the current signal value based on the display interval.
'peak'
(
Peak values
)
Displays the peak value from the previous interval.
'average'
(
Averaged values
)
Displays the average of all values received during the previous interval.
'rms'
(
Root-mean-square
)
Displays the RMS (root-mean-square) of the values received during the previous interval.
signalusecols[int]: 0
Signals Use Columns
stcolor[4 floats]
Sets the default text color of the scroller handle (thumb) in RGBA format.
textcolor[4 floats]
Sets the default text color of the jit.cellblock object in RGBA format.
vscroll[int]: 1
Toggles vertical scroll bar behavior. When set to 0, this attribute will override the jit.cellblock object’s automatic handling of scrollbar display when there is more information to show than the current settings can manage.
vsync[int]: 1
Toggles synchronizing vertical movement with another jit.cellblock object whose third outlet is connected to the right-most inlet of the jit.cellblock object.
Common Box Attributes
annotation[symbol]
Sets the text that will be displayed in the Clue window when the user moves the mouse over the object.
background[int]: 0
Adds or removes the object from the patcher's background layer.
adds the object to the background layer, removes it. Objects in the background layer are shown behind all objects in the default foreground layer.
color[4 floats]
Sets the color for the object box outline.
fontface[int]
Sets the type style used by the object. The options are:
plain
bold
italic
bold italic
Possible values:
0 = 'regular'
1 = 'bold'
2 = 'italic'
3 = 'bold italic'
fontname[symbol]
Sets the object's font.
fontsize[float]
Sets the object's font size (in points).
Possible values:
'8'
'9'
'10'
'11'
'12'
'13'
'14'
'16'
'18'
'20'
'24'
'30'
'36'
'48'
'64'
'72'
hint[symbol]
Sets the text that will be displayed in as a pop-up hint when the user moves the mouse over the object in a locked patcher.
ignoreclick[int]: 0
Toggles whether an object ignores mouse clicks in a locked patcher.
jspainterfile[symbol]
JS Painter File
patching_rect[4 floats]: 0. 0. 100. 0.
Sets the position and size of the object in the patcher window.
position[2 floats]
write-only
Sets the object's x and y position in both patching and presentation modes (if the object belongs to its patcher's presentation), leaving its size unchanged.
presentation[int]: 0
Sets whether an object belongs to the patcher's presentation.
presentation_rect[4 floats]: 0. 0. 0. 0.
Sets the x and y position and width and height of the object in the patcher's presentation, leaving its patching position unchanged.
rect[4 floats]
write-only
Sets the x and y position and width and height of the object in both patching and presentation modes (if the object belongs to its patcher's presentation).
size[2 floats]
write-only
Sets the object's width and height in both patching and presentation modes (if the object belongs to its patcher's presentation), leaving its position unchanged.
textcolor[4 floats]
Sets the color for the object's text in RGBA format.
textjustification[int]
Sets the justification for the object's text.
Possible values:
0 = 'left'
1 = 'center'
2 = 'right'
varname[symbol]
Sets the patcher's scripting name, which can be used to address the object by name in pattr, scripting messages to thispatcher, and the js object.
Messages
bang
Sends the contents out the object's left outlet, and sends a message through the third outlet in the form set value-list.
list
Selects a cell within the cellblock. The message list col-number row-number is equivalent to the message select col-number row-number.
- column
[int]
- row
[int]
append
The word
, followed by a data element or a list of elements, will add the specified valid Max data to the contents of the currently selected cell.- input
[list]
cell
The
message allows you to control the appearance of a single cell within the cellblock. Using the message will override changes for both row and col message.- column
[int]
- row
[int]
- setting
[symbol]
- value
[list]
clear
The
message removes data from the cellblock. The message <col-number row-number> clears the contents of the specified cell. will clear the entire contents of the cellblock. The message will clear the contents of the currently selected cell(s). The message with no arguments is equivalent to the message .- option
[list]
col
The col message allows you to control the appearance of a single column within the cellblock. Using the col message to override color settings will override any color changes made with the row message. Using the cell message will, however, override color changes for both col and row messages.
- column
[int]
- setting
[symbol]
- value
[list]
deref
Disconnects a jit.cellblock object from any attached coll objects.
dump
Sends a listing of the contents of all non-empty cells out the object's left outlet, one line per cell. Each output line takes the form col-number row-number cell-contents.
jit_deref
The message jit.matrix object.
will dereference the currently referenced
jit_matrix
The message jit.cellblock object's display/edit to directly reference the received jit.matrix rather than maintaining its own data structure.
will cause the- name
[symbol]
mode
Set operational modes
- operational-mode
[list]
plane
The word jit.matrix object, will display that plane. The special message will display all four planes of an RGBA jit.matrix object simultaneously.
followed by an integer that specifies a numbered plane in a- input
[int]
prepend
Adds the specified valid Max data to the beginning of the currently selected cell contents.
- input
[list]
read
Opens and reads the contents of a cellblock file from disk if a filename is specified. No attempts are made to verify the contents. If no filename is specified, a file dialog box will be displayed to allow selection of a saved cellblock file.
- filename
[symbol]
refer
The word coll, object, displays the contents of the named coll object's internal list. Changes to the data in the jit.cellblock will change the contents of the attached coll object.
, followed by the name of a- name
[symbol]
refresh
Causes the jit.cellblock object to be redrawn.
row
The row message allows you to control the appearance of a single row within the cellblock.
- row
[int]
- setting
[symbol]
- value
[list]
rowblend
The word
, followed by two numbers in the range 0-100 specifying foreground and background blend percentages. blends the foreground and background colors for the cellblock object.- foreground
[int]
- background
[int]
select
The select message, followed by a column number and row number, will select the requested cell using the current selmode. The leftmost outlet of jit.cellblock outputs a message in the format of . The third outlet outputs a message in the format of , which can be connected to another jit.cellblock for synchronization between two cellblocks.
- column-number
[int]
- row-number
[int]
send
The word receive object, will transmit cellblock values without using connected patch cords; it is the equivalent of sending the output through a send object.
send receive-object col-number row-number will send the data in the specified cell to the specified received object. send receive-object all sends all non-empty cell contents to the specified receive object as a series of lists in the form cell-data-type value.
- name
[symbol]
- option
[list]
set
Replaces a cell's data with the data specified. Two forms are supported:
set current value replaces the currently selected cell's contents.
set col-number row-number values replaces the specified cell's contents.
- input
[list]
setwithoutdirty
The word jit.cellblock, executes that message without dirtying the patcher. Example: sets the text justification of column 0 without dirtying the patcher, which would normally occur when sending this message. You can also disable patcher dirtying permanently by enabling the neverdirty attribute. Ironically, doing so will itself dirty the patcher.
followed by any message to- message
[list]
signal
Displays signal input based on the signalmode attribute setting.
sync
Receives input in the jit.cellblock object's right inlet from another jit.cellblock object, so that two cellblocks can maintain location and selection synchronization. Synchronization allows for multiple jit.cellblock objects to react as if connected. One use of synchronization is used to force external cellblock objects to act as header rows and columns for a main jit.cellblock. For more information on setting synchronization, see the message.
- messages
[list]
text
Replaces the value of the currently selected cell with the incoming text values. This is provided as a convenient way of receiving the output of a textedit object.
- input
[list]
write
Opens a file and writes the contents of a cellblock file to disk. If a filename is specified, that file is created and written. If no filename is specified, a file dialog box will be displayed to allow selection of a pathname and file.
- filename
[symbol]
writeagain
If a file has been written, the
message will allow it to be rewritten without further user interaction.Output
list
Out left outlet: A list containing the currently selected column number, row number and the contents of the cell. The form of the output will be dependent on the mode outmode setting, which will determine if the contents will be provided individually, as a single list or as a single symbol.
list
list
Out the right outlet: Synchronization messages are sent out the right outlet, meant as a source for the right inlet of other jit.cellblock objects. These messages can also be used to determine the current state of movement within the cellblock - for instance, the message notifies that a cell has been click-selected, while the message notifies that a cell has been selected (either by clicking, or programmatically).
See Also
Name | Description |
---|---|
coll | Store and edit a collection of data |
maximum | Output the highest value |
minimum | Output the smallest value |